Yes. Most cities in Travis County and Hays County require a permit for installing a new 240V circuit for a Level 2 EV charger. A licensed electrician will handle the permit and inspection process.

It depends on your panel size and current electrical load. Many 200-amp panels can support a Level 2 charger, but a professional load calculation is required to confirm safe capacity.

Most installations range from $750 to $3,500 depending on wiring distance, panel capacity, and whether a panel upgrade is needed.

Standard installations typically take 2–4 hours. If a panel upgrade is required, the installation may take a full day.

Yes. Charging at home, especially overnight, is typically significantly less expensive per mile than using public fast charging stations.

Thunderstorms often produce lightning, high winds, and falling debris. Lightning can damage transformers, while wind can bring down power lines. Flash flooding can also impact electrical infrastructure. These combined factors make outages common during severe storms.

After a power outage thunderstorm:

• Check your generator for proper operation

• Inspect for visible debris damage

• Reset tripped breakers if necessary

• Call a licensed electrician if your generator fails to start

Never attempt electrical repairs yourself.

Most manufacturers recommend annual servicing, or after every 200 hours of run time. In storm-prone areas like West Austin and Dripping Springs, pre-season inspections are strongly recommended.

The average cost for a Generac generator including professional installation typically ranges between $9,000 and $18,000 depending on home size, electrical demand, and site conditions.

Yes. Generator installations require electrical permits and inspections to ensure safety and code compliance. PowerMeans Electric handles all permitting and inspections for homeowners, which can often include multiple permits in areas such as Lakeway, which require HOA permits.